Oasser Mini Air Inflator Portable Air Compressor Hand Held Pump with Digital LCD Rechargeable Li-ion 12V 150PSI
【Portable and Versatile】Easy to store and carry around with its compact size and can be used anywhere to inflate the car tires in case of emergency (if the battery is full). Suitable for small and medium sized car, bike, motorcycle, sports equipment and inflatables (Note: It cannot be used on trucks)
【Preset Tire Pressure】Preset required tire pressure (Max pressure 150 PsiI) and press power button to start inflating, The tyre pump will switch off automatically once the preset pressure is reached.
【LCD Display & LED Flashlights】The backlit digital LCD display shows pressure in 4 units ( PSI、BAR、KPA and Kg/cm²) Moreover, it can be used at night as it has 2 built-in LED lights for illumination or emergency lighting
【Excellent Performance】After our test, under the working temperature -20°～+60° and pressure ＜35PSI, this tire inflator can keep working for over 1 hour when it is connected with the charger (Note: The tube will get hot after the inflator has worked for a long time. So please do not pull out the tube from valve core and from inflator until it is cooled down)
【Powerful Charging】Supports AC/DC charging and can be fully charged in 1.5 Hours (Please turn off the pump before charging! Please charge the battery after it has been put aside for a long time). We promise 30 Day Money-Back Guarantee & 2-year Warranty Guarantee
Importador y vendedor con sede en la UE: Invech Co., Ltd
Dirección: International House, 61 Mosley Street, Manchester, M2 3HZ
Do you have any concerns？
The tire pressure of the car is lost as time goes by.
Tire pressure varies with temperature.
Low pressure leads to increase fuel consumption.
Oasser P1 Rechargeable Digital Electric Pump will solve you all perplexities!
How to Use
1. Inflator should be well charged in advance.
2. Please connect one end of air tube to inflator and plug the other end of it to tyre valve core (Screw the tube into screw hole on the bottom of the inflator.)
3. Press “UNIT” to active display.
4. Press “-” and “+” to preset the pressure value, and press the “UNIT” to confirm.
5. Press “Power” to inflate.
6. Press “power” to power off.
7. Use charger and cigarette lighter to plug DC socket to charge.
Input voltage:cigarette lighter 12V DC ，adaptor 15V DC.
Air flow rate:13Litres/Min.